my pet wolf figured there must be meat deep in the seats

SOLD 1991 Stratos 15′ 6″ Bass Boat lake check. This boat was tested on Lake Lanier on ten/07/2011 and ran fantastic. There is much more data on my internet site www.lanierboatsales.com or you can contact or text 404-642-9918

Hydra Sport bass boat for sale
Video Rating: / five

Scott Duncan and Mike Gofron set up a Minn Kota Fortrex to an older Champion Bass boat. www.walleyeworkshop.com http
Video Rating: 5 / five

Question by iwackem11: I enjoy to bass fish and i need to have to put flooring from front to back of my 14 ft jon boat, any suggestions? thanks alot
2008 14 ft triton jon boat–>rivited, not welded.

Greatest answer:

Solution by jdawg
marine grade 3/4″ plywood

Know far better? Leave your very own answer in the feedback!

Greatest answer:

Solution by It wants to stand On it really is personal
They are all nonetheless high-priced,particularly due to the reputation of bass fishing and bass fishing tv.

Know much better? Leave your very own solution in the comments!

Greatest answer:

Answer by 45 vehicle
Most all boats have the same wiring concepts some more some significantly less search till u fine one that helps u wire the boat u have.I wire boats and in no way use a diagram just wire every single to the panel.

Add your own solution in the comments!

Bass Boat Nitro
Video Rating: / 5

Query by : Outboard trim on nitro fishing boat not working?!?
Ok so i have a nitro bass boat with a 1999 mercury 150hp xr6 outboard on it. I went to test every little thing out the other day and I seen that the trim button on the motor itself operates to trim the motor up or down. Nevertheless the trim button on my throttle lever, nor the trim buttons close to my bow mount trolling motor operate. I checked the fuse panel underneath the console, and didnt discover any broken fuses. I also unplugged the two relays on the backside of the outboard to check out for corrosion, and could not come across any. Im running out of options, can anybody please aid with what you assume my difficulty may be, or aid me with a way to trace down what my problem is?

Greatest solution:

Solution by LIMA 45.05.18.77
The truth that each sets of controls are not operating indicates to me a issue with engine wiring harness, not the remote management harness. There really should be an inline fuse holder in the trim program wiring, either on the purple/white wire, or the blue wire. Examine these very first, and make sure the contacts in the fuse holder are clean. If the issue persists, you will have test for continuity every single wire in the technique from terminal to terminal. This will be time consuming, but ought to isolate the problem.

Know better? Leave your very own answer in the comments!

For instance, a 16 foot aluminum Bass Tracker with a 50 hp 2-stroke mercury was about $ 13K. Even though a 16 foot nitro with a 90 hp 2-stroke mercury was about 19K. I have heard that aluminum is lighter and so the HP on the motors can be reduce whilst still giving adequate power to get even though the water.

What do you feel are the advantages/disadvatages of aluminum vs fiberglass for bass boats?

Best answer:

Answer by cas_marti
The added $ 6K was probably to spend for the excess 40 HP on the outboard. Boating isn’t low-cost. You want a more expensive hobby?…….start off taking flying lessons!…..LOL!
Definition of a boat : “A hole in the water that you pour funds into.”

Know greater? Leave your very own answer in the comments!

My new Nitro producing a run at 75mph+